Pouria Posted January 19, 2006 Report Share Posted January 19, 2006 Hi,I have an old fashion PC ;MB :ASUS CUSI-FXCPU:VIA C3 800 When I wanted to install XP on it The system could not bootI changed the speed of CPU into BIOS by changing BUS speeds and thenSystem worked! in only 400 MHzI have updated the bios by downloading the file from ASUS website.By it's original flash program I update the BIOS software.BUT NOW MY BIG PROBLEM:SYSTEM BOOTS UP & I CAN ENTER THE BIOS BUT DURING THE POST OPERATIONSYSTEM HANGS!!!I have the backup but I can not programming the BIOS again becausethe flash utility is not in the BIOS & I can only use floppy disks!!!Special thans for any Help. Quote Link to comment Share on other sites More sharing options...
r4may Posted January 19, 2006 Report Share Posted January 19, 2006 Can you get the Flash program from the ASUS site on to a floppy and run it from that ?You could also get another Bios software or reload the original it you saved it. edit to Add line Quote Link to comment Share on other sites More sharing options...
Pouria Posted January 21, 2006 Author Report Share Posted January 21, 2006 I have told you before...I have downloaded it but DURING POST it hangsSO I CANNOT USE FLOPPY DRIVE OR ANYTHING ELSE!!!The only thing I can do is :I can press DEL and go into BIOS Setup. Quote Link to comment Share on other sites More sharing options...
Pouria Posted January 25, 2006 Author Report Share Posted January 25, 2006 Ok!Nobody knows that.But if you want to programming BIOS with AWDFLASH.EXE & an original *.BIN file & everything is ok and thenyou get this message "Source File Not Found."What can you do then? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.