andy29 Posted December 27, 2005 Report Share Posted December 27, 2005 Hi... I have a USB flash drive which isn't working in my hub. I'm using Windows 2000 with a QDI Kudoz 7X motherboard which has built-in USB 2.0. If I plug the drive into any of the board's ports (2 directly on the board, and 4 which are on a backing plate and connect to the board with wires), it works perfectly.I have just fitted this Belkin USB 2.0 hub with an NEC chipset. Now, every other USB device I have, including a flash drive/mp3 player, work fine. When I plug the original flash drive back in, it is detected as just 'USB' and comes up as an unknown device in device manager. Now, if I reinstall the hub's driver (Generic USB Hub), keeping the same one from usb.inf, the drive suddenly works! Then if I unplug it and plug it back in again, it changes back to being an unknown device.Any ideas? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.