carox Posted April 18, 2009 Report Share Posted April 18, 2009 I am using Microsoft Windows Xp professional....Since few days,the display of my monitor is not coming up correctly....default Monitor is Intel®89945G Express chipset family...Under the Screen resolution there is no option of 1280 by 800 pixels.....the best possible options coming are: 1280 by 768 pixels and 1280 by 960 pixels (this goes out of range).......I have formatted my comp but with no effect...I have tried installing the drivers of mother board but the display is not coming up accurately....Plz help me finding the solution of the problem......Carox. Quote Link to comment Share on other sites More sharing options...
ɹəuəllıʍ ʇɐb Posted April 19, 2009 Report Share Posted April 19, 2009 I cannot find any 89945G graphics controller on the Intel website; what exactly is your graphics card? Quote Link to comment Share on other sites More sharing options...
carox Posted April 19, 2009 Author Report Share Posted April 19, 2009 I cannot find any 89945G graphics controller on the Intel website; what exactly is your graphics card?Following is the diagnostic report:Intel® Graphics Media Accelerator Driver ReportReport Date: 04/19/2009Report Time[hr:mm:ss]: 12:44:23Driver Version: 6.14.10.4436Operating System: Windows XP* Professional, Service Pack 2 (5.1.2600)Default Language: EnglishDirectX* Version: 9.0Physical Memory: 1015 MBMinimum Graphics Memory: 64 MBMaximum Graphics Memory: 128 MBGraphics Memory in Use: 7 MBProcessor: x86Processor Speed: 2813 MHZVendor ID: 8086Device ID: 2772Device Revision: 02* Accelerator Information *Accelerator in Use: Intel® 82945G Express Chipset FamilyVideo BIOS: 1215Current Graphics Mode: 1280 by 768 True Color (60 Hz)* Other names and brands are the property of their respective owners. -------------------------I am 99% sure that previously the setting was 1280 by 800 but even if I am 1% wrong then what should i do to bring back proper display?? Quote Link to comment Share on other sites More sharing options...
ɹəuəllıʍ ʇɐb Posted April 20, 2009 Report Share Posted April 20, 2009 See if installing the latest driver for your graphics card fixes the problem: Intel® 82945G Express Chipset - Graphics Media Accelerator Driver for Windows XP. Quote Link to comment Share on other sites More sharing options...
carox Posted April 20, 2009 Author Report Share Posted April 20, 2009 I have installed and restarted the computer but there is no change....The Diagnostic Report is : Intel® Graphics Media Accelerator Driver ReportReport Date: 04/20/2009Report Time[hr:mm:ss]: 14:32:17Driver Version: 6.14.10.4926Operating System: Windows XP* Professional, Service Pack 2 (5.1.2600)Default Language: EnglishDirectX* Version: 9.0Physical Memory: 1015 MBMinimum Graphics Memory: 64 MBMaximum Graphics Memory: 128 MBGraphics Memory in Use: 7 MBProcessor: x86Processor Speed: 2813 MHZVendor ID: 8086Device ID: 2772Device Revision: 02* Accelerator Information *Accelerator in Use: Intel® 82945G Express Chipset FamilyVideo BIOS: 1215Current Graphics Mode: 1280 by 768 True Color (60 Hz)* Other names and brands are the property of their respective owners. There is again no option of screen resolution 1280 by 800. Quote Link to comment Share on other sites More sharing options...
Boris Posted April 20, 2009 Report Share Posted April 20, 2009 As far as I know, the only display with a 1280 x 800 resolution is on a laptop - is that what you have ?If not and you have a separate monitor - which exact model is it ? Quote Link to comment Share on other sites More sharing options...
ɹəuəllıʍ ʇɐb Posted April 20, 2009 Report Share Posted April 20, 2009 What is the driver date (you can see it in the Properties of the Device Manager)?Intel sometimes use different version numbers, e.g. the one on the website saysVer:14.32.4.4926Date: 2008-02-15Your driver version says 6.14.10.4926, so I wonder what the date is? (Note the similar 4926 at the end of the version no.) Quote Link to comment Share on other sites More sharing options...
ɹəuəllıʍ ʇɐb Posted April 21, 2009 Report Share Posted April 21, 2009 According to http://www.intel.com/support/graphics/sb/CS-022544.htm, Intel graphics drivers support:Display modes reported by the monitor’s EDID (Extended Display Information Data). Only plug and play monitors can provide EDID information to a computer.Custom display modes defined within the Video BIOS Table (VBT) by the computer manufacturer.Static modes for non Plug and Play monitors without an EDID. The set of basic static display modes (at 60Hz and up to 32bpp colors) include 640x480, 800x600, 1024x768, 1280x1024, and 1600x1200. Quote Link to comment Share on other sites More sharing options...
carox Posted April 21, 2009 Author Report Share Posted April 21, 2009 Static modes for non Plug and Play monitors without an EDID. The set of basic static display modes (at 60Hz and up to 32bpp colors) include 640x480, 800x600, 1024x768, 1280x1024, and 1600x1200.Exactly I know this that's y I told I am 99% sure, I previously has setting of 1200 by 800 but not sure..Driver details of Intel® 82945G Express chipset family:Driver Provider: Intel CorporationDriver Date: 2/15/2008Driver Version: 6.14.10.4926The driver version is latest.....http://downloadcenter.intel.com/filter_res...mp;submit=Go%21I am not having laptop, its a desktop having wide screen monitor( 15") '1580 TWN True Hue technology' By Mercury.......I dont think these monitors are available outside India..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.