sgfreestyler Posted October 24, 2011 Report Share Posted October 24, 2011 Hi, I need some advise. I have this A server which is configured to time-sync with internet timing. I have another B server wanted to time-sync with A server but unable to. Is there anyway to configure it?Both r running Win 2003 server. Cheers Quote Link to comment Share on other sites More sharing options...
ɹəuəllıʍ ʇɐb Posted October 25, 2011 Report Share Posted October 25, 2011 Define "unable". Quote Link to comment Share on other sites More sharing options...
sgfreestyler Posted October 27, 2011 Author Report Share Posted October 27, 2011 I received an error"An error occurred while Windows was synchronizing with xx.xx.xx.xx" Quote Link to comment Share on other sites More sharing options...
smear Posted January 5, 2012 Report Share Posted January 5, 2012 The NTP Time Servers supplied by Galleon provide accurate time as well as network security because they receive the time from either the GPS satellites or the Radio Atomic Clock in Colorado. This time is available without compromising your computer networks security they receive the time off air by radio signals or from satellites so maintain your firewall and network security.ORClick Start, click Run, type regedit, and then click OK.Locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\AnnounceFlagsIn the right pane, right-click AnnounceFlags, and then click Modify.In Edit DWORD Value, type A in the Value data box, and then click OK.Quit Registry Editor.At the command prompt, type the following command to restart the Windows Time service, and then press ENTER:net stop w32time && net start w32timeThe NTP Time Servers supplied by Galleon provide accurate time as well as network security because they receive the time from either the GPS satellites or the Radio Atomic Clock in Colorado. This time is available without compromising your computer networks security they receive the time off air by radio signals or from satellites so maintain your firewall and network security.ORClick Start, click Run, type regedit, and then click OK.Locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\AnnounceFlagsIn the right pane, right-click AnnounceFlags, and then click Modify.In Edit DWORD Value, type A in the Value data box, and then click OK.Quit Registry Editor.At the command prompt, type the following command to restart the Windows Time service, and then press ENTER:net stop w32time && net start w32time Quote Link to comment Share on other sites More sharing options...
blandickclara Posted April 18, 2012 Report Share Posted April 18, 2012 NTP network transfer protocol it is used network security and data is properly send one network to another network. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.