leaaaa Posted September 15, 2004 Report Share Posted September 15, 2004 i was reading an article on VoDsl and i saw this info saying the way to upgrade a cisco Ata (i have cisco ata186) and now i cant seem to get the vodsl to work it seems as if the router cannot find the ip of the ata. I would be grateful if anyone has any idea as to what to do or how to roll back the driver? Quote Link to comment Share on other sites More sharing options...
nellie2 Posted September 15, 2004 Report Share Posted September 15, 2004 Are you using Windows XP? roll back driver info Quote Link to comment Share on other sites More sharing options...
leaaaa Posted September 15, 2004 Author Report Share Posted September 15, 2004 its not as easy as that you see the ata device is atached to the router and the upgrade has been done by inserting some numbers this is where i found that from http://www.iconnecthere.com/nonmembers/eng...es_ata.html#s31somewhere here it says this Please follow the instructions below if you need to upgrade your software.DO NOT unplug the ATA whilst upgrading. 1. Pick up the phone and press the button on the ATA. You will hear the prompt “Configuration Menu.”2. Press 1 0 0 # to access the upgrade menu.3. Enter the following information into the phone exactly as listed: 213*137*73*159*8000#4. After a short time (up to 5 minutes), you will hear the words “Upgrade Successful”.5. Your software has been upgraded successfully. To read the software version again, press 123#.If the upgrade fails, verify that your ATA is properly configured on your home network and check your ISP connectivity. that is what i did Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.