Jump to content

Loss of video


Recommended Posts

I recently built a computer for a friend... decent budget gaming computer

Asus A8N-E

Athlon64 3000 winchester

512MB Corsair PC3200

XFX 6600GT 128MB PCI-E

350W Antec SmartPower PSU

After I built it I made a point of stress testing the system to make sure that it wouldn't overheat... the guy didn't have money to buy extra fans yet.... stupid I thought.... but its his computer. I also wanted to make sure that the PSU was enough to actually run the system. I ran 3dMark05 like 5-6 times back to back, and the system didnt die, and the processor temp was actually surprisingly low... ~40C via Asus Probe... (my XP 1700 idles @ 42C).

Anyway... the problem is that when he plays WarCraft3, after a few minutes the screen goes black... the system is still running... just no picture... and it ONLY happens in WarCraft3 and 1 other game that I forgot. Any input as to what the problem might be? WC3 isnt anywhere as intensive as 3dMark05 so I would assume its not overheating... likewise on the PSU... I'd figure that the draw would be lower in WC3 than 3dMark05...

Any suggestions as to what the problem might be? I asked a couple of my friends and one mentioned something about a how mouse/monitor/keyboard can cause a black screen, but with these specific circumstances I doubt this as well... Something else I thought of was that this mobo has a 24pin power connector but the PSU only has a 20 pin with the AUX 4 pin for the processor... Do new ATX2.0 mobos require an ATX2.0 PSU to run right?

LAST THING... i swear! He's running a cracked version of XP (agains my vehement disproval) could this be it?

thanks!

-mcg

Link to comment
Share on other sites

LAST THING... i swear! He's running a cracked version of XP (agains my vehement disproval) could this be it?

Probably not, but you never know with a cracked version. We cannot support illegal versions of windows, but I can give you advice on what I would do for this problem.

I would make sure the video card is securlly inserted and that all cables are connected properly. Also, check the video card for heat. I had a problem with a ATI sapphire over heating during World of Warcraft. Caused the same error.

Link to comment
Share on other sites

Game doesn't start. Black screen after Eidos Logo.

Check USB devices. Unplug unnecessary USB devices like cameras, scanners, printers etc. Go to TRAOD Settings and see if there are any USB devices listed that are not game related and disable them. There have been reports of settings displaying multiple keyboards. Turn all off except one.

taken from tomb raider forum faq this may have some bearing on your black screen problem.

usb may also upset warcraft settings?

Link to comment
Share on other sites

Thank you all! Aparantly the guy DIDNT update his drivers like i told him to do after he set his computer up. He then told me he did while i was trying to troubleshoot it over the phone. I had him look up the driver version for me and after I heard it I told him to update his drivers for real. He did and now the problem is fixed... arg...

-mcg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy