Jump to content

help with Win XP crash PLEASE!!!


hot-doc
 Share

Recommended Posts

Hi

I'll be very grateful if someone can help me with this

I have a dell dimension desktop that runs Win XP SP2(updated)

Zone alarm firewall(always on & Norton Antivirus ( updated and on)

In the last week, my system has suddenly gone to the blue screen of death with the message

Bad_Pool_Caller

and asks me to check any software/hardware recently installed. I haven't installed anything for a while!

Does anyone on this forum have any ideas to help??

Thanks

Merry christmas!

Link to comment
Share on other sites

Sudden shutdowns after a period of working OK can often be traced to overheating.

Don't know specifically about your machine but is there any temperature monitoring software installed? If there is you could keep a check on temperatures up until the point it shuts down and note if there's anything untoward.

Link to comment
Share on other sites

You say the temperature was 48 deg. - this was the temp of what? There are several different temperatures measured by Everest.

Even so, that isn't excessive so I think we will have to look elsewhere.

Do you have a lot of (unnecessary) programs running in the background?

Link to comment
Share on other sites

How do you troubleshoot RAM?

Sorry if I sound stupid.

It crashed again 4 hrs ago and this time the Blue screen message was "page fault in non paged area"

I don't know about too many programs in the background but I have 1024 MB of RAM .

the crashes only occur when I am online. Could be too many programs. How do I change that?

Link to comment
Share on other sites

It sounds like a bad installed program. It looks like your only getting memory errors and if its not bad RAM then its probably a corrupt program. The easiest way to find out what program it is, is to go into your event viewer and look for what program caused the error. Start, run, type Eventvwr.msc and on the left click Applications and see if there is any error about the time that it happened. You might want to look through System on the left and see if there are any error also. Running sfc /scannow from run will check all your system executables for corruption. Other than that I would suspect p2p/spyware. Hope something here helps. If it doesn't there is more that can be done.

Link to comment
Share on other sites

I tried using the MEMTEST. got as far as the CDROM ISO Image burning. what do I do with the CDROM though?

I should read posts twice before I reply.

Do you not have a floppy drive..? , Did you burn the memtest disk..??

If you burn't a disk then you would leave it in your computer and restart it , Basicly booting from the CD...

If you get it to boot up just leave it running a good while...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy