Jump to content

Windows freeze


Recommended Posts

Hi all,

Just like that, my windows freezes for 2-3 seconds in spaces of few seconds or few minutes.

Its like the all computer freeze for those seconds when I serf, on the desktop, watching a movie(this is where it mainly happens), play a game or whatever.

It happened to me before but not that extreme like now(a few days its like that).

I ran a Kaspersky and Ad-Aware check and nothing..!

=\

Link to comment
Share on other sites

My CPU temperature is 28 in idle(930D).

About 10-20~ got split with some process, cant remember which.

Also I notice that my explorer is pretty high - 30K+, when it usually around 13K. My highest svchost is also 30K and above but I dont know if it normal or not.

Try killing some of those processes and then running the apps that cause the system to freeze and see if it gets better with those processes not running. Also make note of the system load as the apps that make the machine freeze are running. Make sure you check that those other processes stay dead after you kill them.

Link to comment
Share on other sites

It sounds to me like your system is swapping. What's your page file usage like? I really don't think there is anything wrong with your computer hardware wise, you're just probably doing to much for your hardware to handle. Run some anti virus and anti spyware stuff and generally clean up your computer and see if this still happens.

-8088

Link to comment
Share on other sites

Here my mainly spec

930D

775dual-880pro

2G 667 twinmos

6800 @ 356/887

And it not happen when I run a specific program or something, it happen randoms.

I dont have any s*** on my comp and on my process list that runs - so nothing to kill(see for yourself this is how it always).

My PF usage hits to a 650~ , right now its on 400.

Also almost always my emule and bittorrent are running on the side and maybe ICQ also. But all of this almost and dont take any resources or memory.

post-8533-1182584073_thumb.jpg

Link to comment
Share on other sites

well, looking at your taskbar tells me this still could be a hardware problem.

Since your CPU doesn't have any problems, have you checked the temperature of your RAM if posible, are you sure all the sections of the RAM is working correctly, since that usually cause other kinds of problems - more like funny drawings on the screen or program errors.

Have you checked that both the RAM, the graphics card and any other cards and like are correctly and firmly placed?

Have you blown out all the old dust in the computer - else get some compressed air, and give it a full go on all the internal parts of the computer.

Link to comment
Share on other sites

I am sure all my temps are ok.

How can I cheack my RAM?

P.S.

could it be a HD problem?

No, HD error usually dont freeze the machine, but crashes it.

The RAM can be checked with alot of different programs, so just google for it - an advice is thougth to use more then one program, because it isn't always it reconnizes an unstable RAM module...

Link to comment
Share on other sites

Look I printscreen my mainly errors(9).

There is one that shows a lot more then the others - error 51.

heres the pic:

http://img517.imageshack.us/my.php?image=213213cp8.jpg

When I finish the ram tests I will post here the results.

My bet is on a hard disk issue. Check the one that says "error detected on \device\harddisk0\". I have seen a hard disk issue freeze a machine before. If you have a hard disk problem it could be causing all the other issues. Also hard disk issue is easier to detect usually than flaky RAM or Mainboard. Have you run a fulll surface scan on all of your hard disks to check for bad sectors?

I would download ultimate boot cd and run the hardware checks on hard drive, memory, and mainboard. Start with the hard drive tests.

http://www.ultimatebootcd.com/

PS The HDAT 2 tool looks like it would do the trick of testing your hard disk for you....

Good luck.

Mike

Link to comment
Share on other sites

I did X bad sectors (forgot the name - X) in the hdat2 and it was all blue- meanings no bad sectors.

Is it means that the HD is ok?

Should I run also the "most powerful X", it sound strong test...?

I dont know if I told you or not, every restart I do the computer do chkdsk... And its not like I restart the computer from below.

Link to comment
Share on other sites

You could try that "most powerful" option. It may detect an issue with the controller that the other test overlooked. However, you can expect that test to take a long time, so I would start it before going to bed or something.

Mike

PS....

One other thing you could try is going to your run prompt, (Windows Key + R) and typing "msconfig" (no quotes). To open the MSconfig utility, you could use that to go to the startup tab and disable all items in that tab. Then reboot and see if the issue persists. If it doesnt then you know it was something running in startup and you can turn them back on one at a time to figure out what item is causing the issue. This is probably not going to fix the issue, but it is something quick and easy to try.

Link to comment
Share on other sites

I ran the memtest86-3.3 for 4 and a half hours. I passed 3 and didnt have any errors.

Didnt do the msconfig thing, yet. But I dont think it will matter because this stuck(s , somehow its show it as wrong spelling) are randoms.

Another thing, this "most powerful" can hart the HD?

And why the *uck every restart my computer do chkdsk?!

Link to comment
Share on other sites

The most powerful option will not harm your hard drive, and your system does chkdsk everytime you restart because it is detecting some sort of file system corruption. The chkdsk is a symptom of the issue. You can probably elect to skip the chkdsk once in a while by hitting the space bar when it says "you can press any key to skip chkdsk". Especially if you just ran the chkdsk.

Link to comment
Share on other sites

Looking at the second of the images you posted, it looks like some program is hogging all your resources as the physical memory states 2gb but the available memory is only 2% of that.

Have you tried doing msconfig and disabling all the programs in startup, if this cures it try enabling them one at a time to see when it happens again.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy