cannot access router

[winchendon]

I think i read elsewhere on here that if you cant access you router than you may have a driver error.

is this common? and what components driver would be the one preventing access?

[-pops-]

Does your router work other than being able to address 192.168.1.10?

If so, don't worry about it.

[jww]

I think the default is 192.168.1.1 to access your router, unless it was changed.

Theres also a setting to not allow router log in from wireless so you might want to try getting into it with a network cable

[winchendon]

well I used to access/edit it from 192.168.1.10 for port forwarding etc. but lately I can not access it at all. I need to do a port forward now thats why I'm trying to access it. I don't think I have accessed it since a driver update so I think that might be the culprit. I just don't know if that is the problem or which driver is in control of that.

[Hb_Kai]

I had a similar thread the other day, although my thread, I was told how to get onto my router settings.

Go to CMD / Command Prompt / whatever you call it and type IPCONFIG, then copy the Default Gateway address into your browser address bar and they will show up. Some of the other addresses don't usually work, saying that, they do work sometimes. I don't know. But yeah, this should work.

[winchendon]

after all I did manage to get in with 192.168.1.1

thanks though