madboy33 Posted July 14, 2004 Report Share Posted July 14, 2004 HI FolksJust fitted new stick of 512mb PC2100 DDR ram so i now have 768 of RAMI now keep getting critical errorsNow i dont know if this is the RAM or my PSU cant take it?I did have 2 sticks of 256mb before and now have a 512 and a 128I have an asus A7n266 mobo, Athlon XP2200 Processor, a floppy disc, a CD-ROM and a CD-RW drive fitted and a radeon 128mbddr atlantis graphics cardI think my PSU is 350 wattsAny ideas? Quote Link to comment Share on other sites More sharing options...
trackrat Posted July 14, 2004 Report Share Posted July 14, 2004 I run a similar set up to yours, but have 2 x512 sticks of memory & two hard drives all running of a 350 watt power supply, with no problems.Just out of interest are the 2 sticks from the same maker and have you tried the 512 on its own and with either of the 256 ones you had in origonally.And which slots have you put them in 0 & 1 or 1 & 2 ????? Quote Link to comment Share on other sites More sharing options...
madboy33 Posted July 14, 2004 Author Report Share Posted July 14, 2004 just downloaded sisandra and it says maximum installable memory is 512mbsee attached imageNow is that per dimm slot or is that the maxiumum?Forgot to say that i also have 2 HDD's installed Quote Link to comment Share on other sites More sharing options...
madboy33 Posted July 14, 2004 Author Report Share Posted July 14, 2004 TrackratNo they are not the same makersThe 512 is in dimm 1 and the 256 is in dimm2 Quote Link to comment Share on other sites More sharing options...
-pops- Posted July 14, 2004 Report Share Posted July 14, 2004 From the M/B spec sheet 2 DIMMs up to 1.0GB of PC2100/1600 non ECC DDR memory supportI have found Asus boards to be very critical about the memory they recognise. I always match the brand and size of the sticks when I'm building with Asus boards.Info from ASUS Quote Link to comment Share on other sites More sharing options...
madboy33 Posted July 14, 2004 Author Report Share Posted July 14, 2004 i will remove the 256 and report back folks Quote Link to comment Share on other sites More sharing options...
Rebel=UK= Posted July 14, 2004 Report Share Posted July 14, 2004 I use Twinmos Ram and decided i needed more so i bought a stick of DataWrite i think and my pc used to crash and restart at random, so i swaped it for another stick of Twinmos and have no probs now.......Twinmos is also a much beter make aswell B) Quote Link to comment Share on other sites More sharing options...
madboy33 Posted July 14, 2004 Author Report Share Posted July 14, 2004 Hi allTook the 256 out and it runs fineDamn that means i cant take the 512mb stick backthanks for all your help on this one Quote Link to comment Share on other sites More sharing options...
Scarecrow Man Posted July 14, 2004 Report Share Posted July 14, 2004 Make sure your mobo can support over 512. Sometimes if it can't it will give you funky errors. Also, if they are differen't mhz, like 133 and 100, you'll cause a lot more problems than solve by adding more.And, try each 512 on it's own. If both work, just not together, it's not a RAM problem, might be your mobo... :( Quote Link to comment Share on other sites More sharing options...
madboy33 Posted July 14, 2004 Author Report Share Posted July 14, 2004 Scarecrow Manthanks for that but they are both 266mhz ram 184 pinapparantly my mobo does support 1gb, its only a year old Quote Link to comment Share on other sites More sharing options...
trackrat Posted July 14, 2004 Report Share Posted July 14, 2004 I always use Crucial and I purchased them at the same time.A friend of mine tried mixing different types of ram and it caused all sorts of errors. Quote Link to comment Share on other sites More sharing options...
Intratech Posted July 18, 2004 Report Share Posted July 18, 2004 That one thing to make a mental note of guys. Different memory modules may react differently when mixed with modules from different manufacturer or even different series from the same manufacturer. All memory modules are not the same.. some are made using chips from different manufacturer (hynix, samsung etc.) and some manufacturers use slightly different PCBs. It's always advisable not to mix memory sticks although you may still do so and have them work perfectly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.