Boris Posted August 2, 2003 Report Share Posted August 2, 2003 Had an email from a friend asking if I can find a manual/drivers ? for this mobo which he's bought second hand. Not seen it myself. It is :-Micro ATX; Socket A; 2 SDRAM slots; 3 PCI slots; AMR slot; onboard graphics; SiS 730S chipsetThe only markings on it apparently are a stuck on white label near the DIMM slots with what looks like 830CHR30 on it.Anyone have any ideas ? It was apparently bought new about 18 months ago. Link to comment Share on other sites More sharing options...
Agent Smith Posted August 2, 2003 Report Share Posted August 2, 2003 Boris, can you find out if the board has an FCC ID printed on it (it should have). It may be a bit small.Mr. M. Link to comment Share on other sites More sharing options...
Guest ellas Posted August 2, 2003 Report Share Posted August 2, 2003 if you find it stick it in the search box at this site http://www.hardwaresite.net/fcc.html Link to comment Share on other sites More sharing options...
Guest Shirley_Crabtree Posted August 2, 2003 Report Share Posted August 2, 2003 I would imagine that SiS 730S is enough information to download the appropriate drivers.(Although,obviously,more info is needed to determine the onboard gfx card...but if it is up and working this could be found in device manager)This might help although SIS admit that their drivers ARE tweaked by manufacturers of mobos using their chipsets.http://www.sis.com/products/chipsets/integ...ocketa/730s.htmCheers.Shirl. Link to comment Share on other sites More sharing options...
Boris Posted August 3, 2003 Author Report Share Posted August 3, 2003 Boris, can you find out if the board has an FCC ID printed on it (it should have). It may be a bit small.Mr. M.Thanks Mr M + ellasJust asked the question. Link to comment Share on other sites More sharing options...
Boris Posted August 3, 2003 Author Report Share Posted August 3, 2003 Nothing obvious - he says except for another number - which is some chinese characters + 3902A568 ????He's just tried AIDA which says it is a Jetway 830CF/CH boardI've looked at :-http://www.jetway.com.tw/evisn/index.htmlWhere they have an 830CN or 820CN Ultra manual for download - but no 830CH.Any other ideas ? Link to comment Share on other sites More sharing options...
Boris Posted August 3, 2003 Author Report Share Posted August 3, 2003 He's just d/l'd that one and its correct :D Thanks for all assistance. Link to comment Share on other sites More sharing options...
Recommended Posts