Jump to content

Realtek RTL8185 54M / BT2500V / W98SE


catgate
 Share

Recommended Posts

Following the debacle of a couple of weeks ago I obtained a new PCI wireless card and have plugged it in.The installation of the hardware seems to be successful, in as much as the indications are that the W98SE box is picking up emanations from the router (or somewhere).

The small piece of bog roll that is being passed off as an installation guide is as much use as a chocolate fireguard, and consequently I am soliciting assistance with the setting up of the "network" niceties.

I have looked at several Googled sources and there seems to be little consistency in the information on offer. The only exception being that it is necessary to have the PCI card plugged in and the box switched on.

Realtek seem to be unable or unwilling to provide a downloadable manual ( or even an undownloadable one.)

Link to comment
Share on other sites

I am not sure, having just thought about it, that I want a network. I want to simply connect my W98SE box to the router via a wireless card, so that the Linux box can chew away happily via a piece of wire whilst the W98SE box does in simultaneously by radio waves.

I have downloaded and printed out the words of wisdom from homecomputeraid and scuzzman and will see if I can understand it all.

Don't wait up!

Link to comment
Share on other sites

  • 2 weeks later...

The time has come to own up to the fact that despite having read the words of wisdom from homecomputeraid and scuzzman I am just as far from achieving my objective as I was several days ago.

I have installed my card in my W98SE box and it seems to be picking up signals. The Voyager 2500V is coupled to my adsl line, it is quite happily feeding my Linux machine via an ethernet cable and the wireless activation is ticked in its set up box. My problem revolves round:-

1/ do I just need radio connection from W98SE to 2500V? or

2/ do I have to make a "network" and involve my Linux box? and of course

3/ how?

The above words of wisdom start off from the point of making a cable net work and then linking to a wireless router, whereas I, as far as my logic tells me, do not need a "network". Do I ??

Link to comment
Share on other sites

1/ do I just need radio connection from W98SE to 2500V? - YES

2/ do I have to make a "network" and involve my Linux box? - NO

I this is basically how I operate 3 of my PCs - 1 Linux wired ethernet, 1 XP wired ethernet + 1 XP wireless (with no network set up)

Link to comment
Share on other sites

Well that is encouraging, Boris. I have been messing about trying to use network settings for something I obviously don't need them for.

I am still left with the problem, though, of how I get W98 to connect to 2500V. Should I wipe out all the spurious unwanted network settings and start again with something different. And if so what?

Link to comment
Share on other sites

So I wiped out all the spurious. In fact I uninstalled it all. Then I used the eye of a toad and wing of bat method, and by use of my intellect, well not all of it, I managed to arrange things, by means of SSID, and WEP, so that W98SE now receives internet via 2500V.

Astounding.

The next thing is to find out if it works next time I switch it on.

I will wait until the omens are good.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy