Guest Grim Reaper Posted November 5, 2003 Report Share Posted November 5, 2003 This unified driver has been further enhanced to provide the highest level of power, performance, and reliability. The ATI CATALYST™ software suite is the ultimate in performance and stability. This maintenance release focuses on stability fixes and as such, there are no display driver performance improvements with this release of CATALYST.Display driver: 6.14.10.6396 (XP/2K) Display driver: 4.14.01.9125 (ME/9x) Control panel: 6.14.10.5061 WDM Capture driver: 6.14.10.6217This release of CATALYST™ provides users with a new feature known as the ATI Control Panel Shortcut.download here fro 98/MEDownload here for 2000/XPRelease Notes Quote Link to comment Share on other sites More sharing options...
Guest ellas Posted November 5, 2003 Report Share Posted November 5, 2003 thanks lordy this updating drivers is never ending,what with the nvidia nforce and graphics card on one puter and ati and via on the other its a full time job :rolleyes: Quote Link to comment Share on other sites More sharing options...
Guest Grim Reaper Posted December 11, 2003 Report Share Posted December 11, 2003 These are ATI Catalyst drivers from Hightech version 7.95.5 (6396 for XP) and Control Panel 5061 for windows 9X/ME/2000/XP! All Radeon 7xxx - 8xxx - 9xxx series cards are supported and IPG 340 & 320Download from Here Quote Link to comment Share on other sites More sharing options...
Scarthy © ® ™ Posted December 12, 2003 Report Share Posted December 12, 2003 Hi all ;),Firstly the new Catalyst ?4.0? drivers should be available next week...News Article Here.And secondly...DELL had released a Radeon Catalyst Drivers 7.96. with Control Panel v.6.14.10.5062 for Windows2000/XP.Cards Supported: Radeon 7xxx - 8xxx - 9xxx series cards.Download>>>HERE<<<;) Quote Link to comment Share on other sites More sharing options...
Scarthy © ® ™ Posted December 18, 2003 Report Share Posted December 18, 2003 Catalyst 3.10 Drivers AvailableWell here they are, just in time for Xmas 2003.The CATALYST™ software suite 3.10 contains the following: RADEON™ display driver 7.962 Multimedia Center™ 8.8 HydraVision™ 3.25.0006 HydraVision™ Basic Edition 3.25.9006 Remote Wonder 2.1 WDM version 3.11View - Release NotesDownload Start Point - HERELoads of updates/ fixes.....Go get em !;) Quote Link to comment Share on other sites More sharing options...
Scarthy © ® ™ Posted December 24, 2003 Report Share Posted December 24, 2003 ATI Radeon DNA-Drivers 1.9.3.10AKillerSneak just send in a new version if his DNA drivers. His drivers are slowly getting more and more popular. DNA drivers are modified catalyst drivers made by KillerSneak. The drivers have been optimized for better Image Quality and more/stable frames per second compared to the official Catalyst drivers from ATI.Download - ATI Radeon DNA-DRIVERS 1.9.3.10AView - DNA HomepageNews Source;) Quote Link to comment Share on other sites More sharing options...
Scarthy © ® ™ Posted January 21, 2004 Report Share Posted January 21, 2004 Catalyst 4.1 Drivers AvailableThe CATALYST™ software suite 4.1 contains the following: RADEON™ display driver 7.97 Multimedia Center™ 8.8 HydraVision™ 3.25.0006 HydraVision™ Basic Edition 3.25.9006 Remote Wonder 2.1 WDM version 3.11View - Release NotesDownload - Cat 4.1 for Windows XP OnlyDownload - Cat 4.1 for other OS'sNews Source;) Quote Link to comment Share on other sites More sharing options...
Guest Rebel=UK= Posted January 21, 2004 Report Share Posted January 21, 2004 any1 kow if these give a improvemnet over the 3.10's Quote Link to comment Share on other sites More sharing options...
Scarthy © ® ™ Posted January 22, 2004 Report Share Posted January 22, 2004 I haven't installed them yet, still on 3.10's. You might find some info HERE in the ATI forums over at Rage3D.com.The main update with the 4.1 drivers seems to be stability and resolved gaming issues.;) Quote Link to comment Share on other sites More sharing options...
Guest Rebel=UK= Posted January 22, 2004 Report Share Posted January 22, 2004 aye well ive just been playing Need for speed underground reet, and it crashed after about 30mins everytime, im guessin its a overheating prob right, and i heard the 4.1's had a temp monitor for XT cards only.....how do i get it on? Quote Link to comment Share on other sites More sharing options...
Tony Posted February 15, 2004 Report Share Posted February 15, 2004 HiNew ATI CATALYST 4.2 Drivers available.The quote is taken from Technology VaultCLICK HERE for a quick link to the XP drivers.CheersTonyTechnology Vault NewsBytesThursday 12 February, 2004 CATALYST 4.2 is now available by thecaretaker @ 7:36 pmTerry Makedon has just sent the following infomation to The Technology Vault.Just wanted to inform your readers that CATALYST 4.2 is now available. This update provides a new driver (now up to version 7.98) and a new multimedia center (now up to version 8.9). CLICK HERE for a quick link to the XP drivers.Furthermore I wanted to let you know that ATI in conjunction with Beyond3d.com and DriverHeaven.net have released a "SMARSHADER Effects" tool. This innovative new concept will let users create their own shaders and load them up on CATALYST. Both Beyond3d.com and Driverheaven.net will be hosting this tool as well as having great end user contests to get peoples creative shader juices flowing. These can be found here and I highly recommend checking them out http://www.beyond3d.com/misc/atiss/ and http://www.driverheaven.net/smartshader/New Features This section provides information on new features found in this release of the CATALYST Display Drivers. New features include: Component Video Output EnhancementThe latest ATI software driver now allows the user the choice of using panning mode or a center-timing mode in which the image would appear in the center of the TV screen when using the Component Video output on an HDTV display. This option is found in the ATI Control Panel and is supported under the Windows XP, Windows 2000, and Windows ME operating systems. This feature is available on the ATI RADEON 8500 and higher class of products. Direct3D Setting EnhancementPrevious versions of the ATI display driver required the monitor going blank for up to 8 seconds when applying Direct3D settings. The latest ATI software driver for the RADEON 9500 and higher class of products now allows for the Direct3D setting to be applied without the monitor's display going blank. Performance Improvements As with most CATALYST releases performance has increased in various situations. This release of CATALYST provides performance gains to the ATI DX8 product family. These products include the RADEON 9200, 9000, and 8500 series. Performance gains are noticed throughout the following software: * Framerates in Unreal Tournament 2003 is up by 15% * A performance gain of between 5 and 10% is noticed in Aquamark3 * A performance gain of between 2-3% is noticed in ShaderMark scores * Framerates in Halo is up between 3-4% * A performance improvement of 2% is noticed in Tomb Raider Some Resolved Game Issues This section provides information on game issues that have been resolved in the latest release of CATALYST. These include the following: * Launching the game Tron 2.0 under Windows XP no longer results in the game failing to respond after the game introduction is loaded * Launching the game Line of Sight: Vietnam and setting the graphics option to 800x600 16bpp no longer results in the game failing to respond when selecting a new game * Running the game Armed and Dangerous under Windows XP with an ATI RADEON 9200 series installed no longer results in the display image appearing corrupted when selecting Storm the Base mission in the game * The game Half-Life is now displayed properly under Windows XP when the game resolution is set to either 320x240 or 400x300 * Playing the game Serious Sam 2 under Windows XP with an ATI RADEON&tdrade; 9500/9800 series installed no longer results in the game failing to run when the game option is set to OpenGL * Playing the game Unreal Tournament 2003 under Windows XP with an ATI RADEON 9600 series installed no longer results in texture corruption being displayed on the flag surfaces in the DM-Tokara Forest * Selecting the Optimum Quality setting in D3D control panel no longer results in a frozen frame when launching the game HALO * Setting the resolution in the game SpyHunter to 1280x1024 along with having the Use Recommended Settings slider set to balanced in the ATI 3D tab no longer results in some background images being missing while the game is loading * Setting the display option to 640x480 or 800x600 in the game Splinter Cell no longer results in the game menu flickering * Returning to the main menu in the game Counter-Strike no longer results in the game's refresh rate reverting back to 60Hz when resuming game play New Features found in the ATI MULTIMEDIA CENTER 8.9Smooth Aspect Ratio Transition Enhancement EAZYLOOK allows the user to view TV and DVD features from a distance. Currently when changing the aspect ratio in the TV or DVD the transition changes are not smooth. This new feature allows for a smooth transition when changing the aspect ratio. EAZYLOOK Menu Functionality With the new EAZYLOOK menu functionality, feature level menus can now be viewed when using EAZYLOOK. Feature can now be configured mwith ease when using EAZYLOOK. Further, users will have an easier time changing settings that are mapped to programmable keys on the remote. Enhanced Scheduled Event Recording The latest version of the ATI MULTIMEDIA CENTER allows users to create and record a scheduled event without viewing the video. Right-clicking on the record button provide the user with a drop down menu that provides a short cut to the recording options available.Thanks Terry!################################ Quote Link to comment Share on other sites More sharing options...
moon Posted February 15, 2004 Report Share Posted February 15, 2004 Just checking before I dive in. Are these drivers OK for Win2K ? ( Radeon 9200 ) Quote Link to comment Share on other sites More sharing options...
nellie2 Posted February 15, 2004 Report Share Posted February 15, 2004 Looks like itComponent Video Output EnhancementThe latest ATI software driver now allows the user the choice of using panning mode or a center-timing mode in which the image would appear in the center of the TV screen when using the Component Video output on an HDTV display. This option is found in the ATI Control Panel and is supported under the Windows XP, Windows 2000, and Windows ME operating systems. This feature is available on the ATI RADEON™ 8500 and higher class of products. Quote Link to comment Share on other sites More sharing options...
moon Posted February 15, 2004 Report Share Posted February 15, 2004 xx :D Quote Link to comment Share on other sites More sharing options...
moon Posted February 15, 2004 Report Share Posted February 15, 2004 PS- Is it favourite to uninstall the previous ATI software first ? Quote Link to comment Share on other sites More sharing options...
Guest ellas Posted February 15, 2004 Report Share Posted February 15, 2004 yes uninstall for best effect use driver cleaner http://www.driverheaven.net/cleaner/ Quote Link to comment Share on other sites More sharing options...
moon Posted February 15, 2004 Report Share Posted February 15, 2004 :D Wot a larf ! I installed the new cats without uninstalling the old ones. I didn't know there was a 'scrolling test' at the Pit but I managed to read the text ten times before it had finished. :D My fps rate fell to 2.5. No worries. Unistalled the lot and went for a fresh install with the new cats. Increased the fps by 12 points over my last drivers :) ( Still only 108.5 but its only a lowly Radeon 9200 ) Cheers all. :) Quote Link to comment Share on other sites More sharing options...
Guest ellas Posted May 13, 2004 Report Share Posted May 13, 2004 ATI Catalyst_v4.5 Releast Notes: Code: http://www2.ati.com/drivers/CATALYST_45_Release_Notes.html Download: (WinXP) Code: http://www2.ati.com/drivers/wxp-w2k-cataly...21a-015419c.exe Download: (Win2K) Code: http://www2.ati.com/drivers/wxp-w2k-cataly...21a-015419c.exe --------------------------------------------------------------------------------ATI Catalyst_v4.3 Download: (Win9x/Me) Code: http://www2.ati.com/drivers/wme-catalyst-7...24m-013831c.exe Link: (To all others!) Code: http://www.ati.com/support/driver.html --------------------------------------------------------------------------------ATI Multimedia Center_v9.0 Link: Code: http://www.ati.com/support/drivers/winxp/r...x=17&submit.y=4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.