Andy-2004 Posted May 15, 2004 Report Share Posted May 15, 2004 Chenbro Gaming Bomb with Side Window - Silver (No PSU) (CA-004-CH) Chenbro introduces an innovative mid-tower gaming case to the gaming market. Its totally screw-less design and high-end features make it ideal for PC gamers who pursue a good balance between style and functions. The case has been engineered to be quiet. To achieve outstanding ventilation, this stable case is cooled using two fans with an air filter to form a front-to-rear airflow for outstanding ventilation. Customers can take advantage of all its features from high performance, flexible expansion options, high storage capacity, seamlessly mechanical design and much more. - Totally screw-less design- 4x 5.25", 1x 3.5" external drive bays- 2x 3.5" internal drive bays- Rear 120mm Fan Holder- 2x USB2.0, 2x audio sockets on front panel Full Specification Price: £42.00 (£49.35 Including VAT at 17.5%)http://www.overclockers.co.uk/acatalog/che...#aCA_2d004_2dCHwhat do you think of this? Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 15, 2004 Author Report Share Posted May 15, 2004 Heres a complete review of all my hardware (attached)Could someone please have a wee look through and tell me if all mt stuff will fit in the new case?Also is it possible (I assume it is) to remove and replace the PSU? Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 15, 2004 Author Report Share Posted May 15, 2004 does anyone know where nellies guide is from when she changed her case? Quote Link to comment Share on other sites More sharing options...
Agent Smith Posted May 15, 2004 Report Share Posted May 15, 2004 Not sure where Nellies one is, but just found this from AndySDhttp://www.windowsforum.org/forum/index.ph...indpost&p=42680Mr. M. Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 15, 2004 Author Report Share Posted May 15, 2004 see, I'm happy with absolutely everything except fitting the motherboard....Ive never done that before and I'm scared of screwing something up....Also I'm not too sure about the PSU....but everything else I'm fine about Quote Link to comment Share on other sites More sharing options...
Agent Smith Posted May 15, 2004 Report Share Posted May 15, 2004 All you need to do, is take your time and don't force anything. Make a note of where all the connections go before you remove it from your old case, and then give yourself a workspace with plenty of room and light, and just be carefull.Once you have done your first, you will wonder what all the fuss was about :D Mr. M. Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 15, 2004 Author Report Share Posted May 15, 2004 ok, now , the case....does any case fit any MObo?Is it a good case? Quote Link to comment Share on other sites More sharing options...
Agent Smith Posted May 15, 2004 Report Share Posted May 15, 2004 does any case fit any MObo? No!!But I've just had a look and your board will fit (according to both manufacturers websites).Is it a good case?I honestly have no idea. It looks Ok, but it is not one I have ever come accross before.I have also had a good look at your mobo website, and I would say I'm 99.5% certain the heatsink you like will fit this board. Your best bet, is to phone overclockers and ask them, just to be sure.Mr. M. Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 15, 2004 Author Report Share Posted May 15, 2004 thats reassuring :PCould i e-mail overclockers? Quote Link to comment Share on other sites More sharing options...
Agent Smith Posted May 15, 2004 Report Share Posted May 15, 2004 Yep, but in my experience do not expect a quick reply.They are excellent at sales on the phone (I ordered several parts on a thursday afternoon at about 4 pm, and they were delivered friday morning at 11), but a bit slow with emails and complaints.Mr. M. Quote Link to comment Share on other sites More sharing options...
-pops- Posted May 15, 2004 Report Share Posted May 15, 2004 A very important thing to take note of is exactly where the motherboard screws down to the facer plate. NEVER have any spacer posts in places where they are not required for your board - and the positions vary between boards. Likewise, place all the ones that are required into position AND USE THEM.Don't get panicky about this, as long as you do it right everything will be OK. Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 15, 2004 Author Report Share Posted May 15, 2004 i don't seem to be told if there are any screws etc included....if there isn't will it be likely i will be able to use all the stuff from my old case? Quote Link to comment Share on other sites More sharing options...
Agent Smith Posted May 15, 2004 Report Share Posted May 15, 2004 Yes Andy, you should be able to. I see from the spec page, that the 5.25”/3.5” devices attach with slidemounts, so these will come with the case, and should either just clip onto your drives, or be screwed on using your old case screws.You will need to use the motherboard posts from your old case, or buy some new ones.Mr. M. Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 15, 2004 Author Report Share Posted May 15, 2004 well here i go....im gona buy both of em....say bye bye 94 quid :rolleyes: Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 15, 2004 Author Report Share Posted May 15, 2004 done :P Quote Link to comment Share on other sites More sharing options...
Besty Posted May 15, 2004 Report Share Posted May 15, 2004 You say bye bye 94 quid i say bye bye 245 quid :( how depressing Quote Link to comment Share on other sites More sharing options...
Agent Smith Posted May 15, 2004 Report Share Posted May 15, 2004 And I recently said bye bye £400.00 , but it was the best thing I have done in years :D :P :lol: Mr. M. Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 15, 2004 Author Report Share Posted May 15, 2004 what for? Quote Link to comment Share on other sites More sharing options...
Agent Smith Posted May 15, 2004 Report Share Posted May 15, 2004 Abit NF7-S V2 moboTagan Silent 480w PSUAMD XP2500 Barton Mobile (now running at XP3400 equiv :P )Thermalright SP97 Heatsink +3 92mm silent fans1 Gb (2x512) Geil matched Cas2 MemoryATI 9600 256 mb XT Graphics + Silent cooling for card :D :P :lol: Best bit of dosh I've spent for years.Mr. M. Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 15, 2004 Author Report Share Posted May 15, 2004 Nice one :P Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 17, 2004 Author Report Share Posted May 17, 2004 im getting my case either tomorrow or wedensday....to get my self started...could i take out the DVD drive now without any hassle? Quote Link to comment Share on other sites More sharing options...
Besty Posted May 17, 2004 Report Share Posted May 17, 2004 Ye i would assume so unless you are going to be needing it in the next day or two. Is it realy worh it though for the sake of 10 mins Quote Link to comment Share on other sites More sharing options...
expertec Posted May 17, 2004 Report Share Posted May 17, 2004 10 mins? surely it doesn't take that long :huh: Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 17, 2004 Author Report Share Posted May 17, 2004 but software wise it wont confuse the computer? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.