Jump to content

Cooling computer


Besty
 Share

Recommended Posts

Hi Besty, I have recently bought a Tagan TG480-U01 480W Silent PSU from Overclockers and so far I can really recommend it :D

As for other cooling, if you go with a good heatsink and fan for your processor, and perhaps a cooling system for your graphics card then unless you intend to really overclock the processor, that should be sufficient. It also helps to replace all your cables with the nice round ones, and to heatshrink the other cables to improve airflow around your case.

Mr. M.

Link to comment
Share on other sites

Remember that case fans should blow INTO the case at the front low level and OUT of the case at the rear, high level (near to the CPU and heatsink/fan). If you only have one case fan that should be at the rear, high level. Make sure in all cases that the grill or vent/filter at the front is not clogged with dust and that there is nothing piled up in front of it preventing a good access of air.

Operating the machine with the side removed and having holes, vents and bits missing from the case (PCI cover plates etc.) will alter the airflow and could possibly result in higher temperatures than with having the side in position.

And yes, round cables on your IDE connections do make a diference. On my machines now I use different colour cables, not for decoration but as tracers showing me what is connected to where (I normally have three or more hard drives). Round cables in several colours can be obtained from Overclockers quite cheaply.

Link to comment
Share on other sites

You can overdo it.

If the system is operating OK with the fan setup as it is, leave it alone.

Only start altering airflows and things if you're having problems with overheating.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy