Andy-2004 Posted May 11, 2004 Report Share Posted May 11, 2004 What temperatures should a CPu (mine) be running atP4... Quote Link to comment Share on other sites More sharing options...
expertec Posted May 11, 2004 Report Share Posted May 11, 2004 What speed is your P4?My Athlon XP2600+ usually runs at about 40 degrees c :huh: Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 11, 2004 Author Report Share Posted May 11, 2004 well it was 2.53 but im currently overclocking it and soo far im on 2.71 Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 11, 2004 Author Report Share Posted May 11, 2004 ???????? Quote Link to comment Share on other sites More sharing options...
madboy33 Posted May 11, 2004 Report Share Posted May 11, 2004 well my AMD XP2200Runs at 50c without an additional fan and 40c with an exhaust fan Quote Link to comment Share on other sites More sharing options...
Andy-2004 Posted May 11, 2004 Author Report Share Posted May 11, 2004 does 31 sound like a very low temperature? Quote Link to comment Share on other sites More sharing options...
madboy33 Posted May 11, 2004 Report Share Posted May 11, 2004 Are you looking at the MOBO temp or the CPU temp?why what the trouble Quote Link to comment Share on other sites More sharing options...
Sir Radfordin Posted May 11, 2004 Report Share Posted May 11, 2004 My AMD is running at 58c whilst the mobo is at 31c.Have no problems so don't worry about it. Quote Link to comment Share on other sites More sharing options...
expertec Posted May 11, 2004 Report Share Posted May 11, 2004 He's overclocking it and he wants to make sure it doesn't get too hot :rolleyes: Quote Link to comment Share on other sites More sharing options...
Agent Smith Posted May 11, 2004 Report Share Posted May 11, 2004 Ok, I'm currently running an AMD 2500 mobile processor at 1.7 volts, fsb 210 multiplier 12 (which means I'm running the pro at 2.5 ghz as opposed to the standard 1.8 :D ), I'm using a thermalright SP97 heatsink with a 92mm silent fan, and I am getting readings of 45 c under full load (running seti and prime 95 torture test). Only other cooling is an extra fan on the graphics card (9600XT vented externally) and two 92 mm's on the PSU. She drops under 40 c at idle.The SP97 is deffo the heatsink to have.Mr. M. Quote Link to comment Share on other sites More sharing options...
andsome Posted May 12, 2004 Report Share Posted May 12, 2004 I have PS Doctor fitted which gives three constant readouts. This morning, ten minutes after boot up the readings are CPU 28 degrees, HDD 29 degrees, and SYS 26 degrees. Last summer in the very high temperatures, the highest temperature on any reading was 46 degrees. I do have an extra fan because I asked for extra cooling, because the computer is in a room which gets very hot, but whereabouts it is fitted, I don't have a clue. Quote Link to comment Share on other sites More sharing options...
christmascracker Posted May 12, 2004 Report Share Posted May 12, 2004 I run a P.4 3.2 and my current temps are CPU 46° MB 30° Quote Link to comment Share on other sites More sharing options...
-pops- Posted May 12, 2004 Report Share Posted May 12, 2004 Don't get in too much of a panic about this. Modern processors will shut themselves down if there is any danger of them frying themselves and most motherboards have a detector which will signal over-temperatures before the danger level is reached. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.