Jump to content

R/C Watch


casey
 Share

Recommended Posts

I have just had a battery fitted to my Brother in laws radio control watch. The problem I have is how to get it to the right time as he never seems to keep any paperwork.

It was purchased through a N/paper offer. It has Crane & Viceroy on the face with 3 buttons on the right hand side. holding the top button in sets the hands spinning & eventually stops at a 1/4 hr fast. Doing the same with the lower button does the same but stops at 5mins fast. It seems as if it is using the wrong time zone. The middle button just seems to move the second hand forward several seconds then the watch stops for 2/3 mins and the resumes.

I wondered if anyone on here had purchased the same watch, had anything similar or any suggestions that might help.

casey.

Link to comment
Share on other sites

I doubt that it is anything to do with time zones - if it was - the watch would out in units of 1 hour (or half hour for a very few countries).

Is there any chance the minute hand was disturbed when the battery was changed so it has moved 90 degrees on its spindle ?

Link to comment
Share on other sites

Received a copy of instructions from them. Tried using them but it insists on being 15 mins fast. It had instructions for setting the time manually, so set time exact, next morning it was 15 mins fast again. It checks itself for accuracy at 2o/c AM so had overridden my settings.

casey

Link to comment
Share on other sites

Managed to sort it. It was a matter of setting all three hands to 12 o/c using various buttons pushes. If it gets through tonight, which I think it will, it will be O/K. Must have nearly run down the new battery trying to sort this just because he won't save paperwork.

casey

Link to comment
Share on other sites

Hope it works, from what you have said it sounds as if it's re-setting itself at 02:00 but the minute hand is 15 mins fast. If this is the case then it is setting itself by a reference to an internal setting of the gears. These rotate the spindle that the minute hand is pushed on to. If it has been turned on the spindle then it will still show 15 mins fast tomorrow. If this is the case you will have to have the minute hand re-fitted. It should be just a matter of having it pull off and re-fitted. I used to do this with pressure guages when I was responsible for calibration and adjustment of pressure guages for Plessey Avionics. You do need the appropriate tools, so a short visit to a good watch maker will be required. Let us know how it is in the morning. Good luck!

Link to comment
Share on other sites

Thanks doug but it is working perfectly now. It has been running since 8 o/c PM last night and up to now is keeping perfect time. Followed the instructions given me by Coopers who Gandalph directed me to. They were very helpful people.

Thanks to all who replied.

casey

Link to comment
Share on other sites

  • 2 months later...
I have just had a battery fitted to my Brother in laws radio control watch. The problem I have is how to get it to the right time as he never seems to keep any paperwork.

It was purchased through a N/paper offer. It has Crane & Viceroy on the face with 3 buttons on the right hand side. holding the top button in sets the hands spinning & eventually stops at a 1/4 hr fast. Doing the same with the lower button does the same but stops at 5mins fast. It seems as if it is using the wrong time zone. The middle button just seems to move the second hand forward several seconds then the watch stops for 2/3 mins and the resumes.

I wondered if anyone on here had purchased the same watch, had anything similar or any suggestions that might help.

casey.

I have a similar problem. Not exactly - I am usually pretty good with paperwork but my girlfrend is a manic tidier a she threw away my instructions. :0

I see that you finally solcved the problem ...I 've been battling with it for about two months now! What is the secret combination of button pushes?

Will be eternally grateful and possibly occasionally on time for work if you can help. :D

Cheers,

Link to comment
Share on other sites

  • 2 months later...
  • 5 months later...
Someone knows if this watch works outside UK?

In other words, is it able to synchronize with other radio signals, ie, with Mainflingen (Germany)?.

Thanks in advance.

Yes it will synchronise with Mainflingen in Germany. The RC are linked. The Rugby one is now defunct and has been transferred to Cumbria.

Link to comment
Share on other sites

  • 2 weeks later...
Have uploaded it again although the original worked O.K for me R/C watch

This is most curious. I have just tried your new link and I have the same problem. Each time I try to download the file it only gets part way then stops. I have just tried 5 times and the longest download was 171 KB out of 425.76 KB - one was as short as 57 KB out of 425.76 KB.

Last time it took about a dozen attempts before it did a full download.

Link to comment
Share on other sites

  • 1 month later...
I have uploaded the pdf file which is the instruction manual I received here - <a href="http://www.mediafire.com/?0gowjbovm3b" target="_blank">http://www.mediafire.com/?0gowjbovm3b</a>

Instructions not very clear as it has been photocopied but still readable. Hope this helps.

Hi

I am in situation about crane and viceroy watch and ask is it possible someone has similar user instructions?

Gerry

please will you send the link to me as I am in the same situation. Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy